Search results for "balance of plant"
showing 10 items of 10 documents
THERMAL-HYDRAULIC STUDY IN SUPPORT OF THE DESIGN OF THE DEMO BALANCE OF PLANT
2020
The European Research Roadmap to the Realisation of Fusion Energy, foresees that the Demonstration Fusion Power Reactor (DEMO) is going to be the successor of ITER reactor in the pathway towards the exploitation of nuclear fusion to produce electric energy on an industrial scale. It will, hence, have to deliver hundreds MW of electric power ensuring an adequate availability and reliability of operation over a reasonable time span. EU-DEMO pre-conceptual design is being conducted by research institutions and universities from 26 countries of European Union, Switzerland and Ukraine, with the main aim to provide electric energy to the grid from nuclear fusion reactions by 2050. However, where …
Tokamak cooling systems and power conversion system options
2022
DEMO will be a fusion power plant demonstrating the integration into the grid architecture of an electric utility grid. The design of the power conversion chain is of particular importance, as it must adequately account for the specifics of nuclear fusion on the generation side and ensure compatibility with the electric utility grid at all times. One of the special challenges the foreseen pulsed operation, which affects the operation of the entire heat transport chain. This requires a time-dependant analysis of different concept design approaches to ensure proof of reliable operation and efficiency to obtain nuclear licensing. Several architectures of Balance of Plant were conceived and dev…
Pre-conceptual design of EU-DEMO Divertor primary heat transfer systems
2021
Abstract In the frame of the activities promoted and encouraged by the EUROfusion Power Plant Physics and Technology (PPPT) department aimed at developing the EU-DEMO fusion reactor, strong emphasis has been recently addressed to the whole Balance of Plant (BoP) which represents the set of systems devoted to convert the plasma generated thermal power into electricity and to deliver it to the grid. Among these systems, the Divertor Primary Heat Transfer Systems (PHTSs) are intended to feed coolant to the two main components of the Divertor assembly, namely the Plasma Facing Components (PFCs) and the Cassette Body (CB). Since the DEMO Divertor must withstand high heat flux loads together with…
Progress in the design development of EU DEMO helium-cooled pebble bed primary heat transfer system
2019
Abstract In the frame of the activities promoted and encouraged by the EURO-fusion Power Plant Physics and Technology (PPPT) department aimed at developing the EU-DEMO fusion reactor, strong emphasis has been recently posed to the whole Balance of Plant (BoP) which represents the set of systems devoted to convert the plasma generated thermal power into electricity and to deliver it to the grid. Among these systems, a very important role is played by the Breeding Blanket (BB) Primary Heat Transfer System (PHTS) as it is responsible to extract more than 80% of the fusion plasma power. In this framework, University of Palermo, Ansaldo Nucleare and CREATE have focused their work to improve ther…
Pre-conceptual design of EU DEMO balance of plant systems: Objectives and challenges
2021
Abstract The European Research Roadmap to the Realisation of Fusion Energy foresees that the DEMO reactor is going to succeed ITER in the pathway towards the exploitation of nuclear fusion, achieving long plasma operation time, demonstrating tritium self-sufficiency and producing net electric output on an industrial scale. Therefore, its design must be more oriented towards the Balance of Plant (BoP) than it is in ITER. Since the early pre-conceptual phase of the DEMO project, emphasis has been laid on identifying the main requirements affecting the overall architecture of the BoP. For instance, specific efforts and proper solutions have been envisaged to cope with the pulsed nature of the …
Preliminary design of EU DEMO helium-cooled breeding blanket primary heat transfer system
2018
Abstract The European DEMO conceptual design foresees four Breeding Blanket (BB) concepts that rely on different cooling and breeding technologies. As DEMO has been conceived to deliver net electricity to the grid, the choice of the blanket coolant plays a pivotal role in the reactor design having a strong influence on plant operation, safety and maintenance. Moreover, the machine pulsed operation makes the BB Primary Heat Transfer System (PHTS) the main hub of the DEMO Balance of Plant (BoP). Within this framework, a study has been carried out to design the Ex-Vessel PHTS of the Helium-Cooled Pebble Bed (HCPB) BB concept. The paper describes criteria and rationale followed with the aim to …
Progress in EU Breeding Blanket design and integration
2018
Abstract In Europe (EU), in the frame of the EUROfusion consortium activities, four Breeding Blanket (BB) concepts are being developed with the aim of fulfilling the performances required by a near-term fusion power demonstration plant (DEMO) in terms of tritium self-sufficiency and electricity production. The four blanket options cover a wide range of technological possibilities, as water and helium are considered as possible coolants and solid ceramic breeder in combination with beryllium and PbLi as tritium breeder and neutron multipliers. The strategy for the BB selection and operation has to account for the challenging schedule of the EU DEMO, the ambitious operational requirements of …
Preliminary Thermo-Mechanical Design of the Once Through Steam Generator and Molten Salt Intermediate Heat Exchanger for EU DEMO
2020
The European DEMOnstration power plant (DEMO) is considered to be the nearest-term fusion reactor capable of producing several hundred MWs of net electricity, operating with a closed tritium fuel-cycle (achieving the tritium self-sufficiency), and qualifing technological solutions for a fusion power plant with different breeding blanket (BB) concepts that are under investigation. The BB is a key component for the development of the DEMO plant design and, in particular, of those systems having the responsibility to remove the plasma-generated thermal power and its conversion in the electrical energy. This study deals with the preliminary thermo-mechanical design of the heat exchangers and st…
Maturation of critical technologies for the DEMO balance of plant systems
2022
The Pre-Concept Design (PCD) of the Balance of Plant (BoP) systems of the EU-DEMO power plant is described in this paper for both breeding blanket (BB) concepts under assessment, namely the Water Cooled Lithium Lead (WCLL) BB and the Helium Cooled Pebble Bed (HCPB) BB. Moreover, the results of a preliminary evaluation of a number of BoP variants are discussed. This paper outlines the steps of the BoP design development, highlighting the project objectives and the strategy for their achievement under the very challenging requirements which include, among others, the intermittent nature of the DEMO plasma heat source. The main achievements during the PCD Phase will be reported together with t…
Systems Engineering approach in support to the breeding blanket design
2019
Abstract Nowadays the Systems Engineering (SE) methodology is applied in several fields of engineering and it represents a powerful interdisciplinary means to enable the realisation of complex systems taking into account the customer and Stakeholder´s needs. Also in the fusion community, this theme is becoming increasingly pressing and the implementation of the SE approach, from the early stage of design, is now a must. Indeed, within the framework of EUROfusion activities, SE method has been selected for capturing the system and interface requirements and for their management and verification with particular focus to the Breeding Blanket (BB) System of the European Demonstration Fusion Pow…